Torches and Lasers

The Holosun IRIS-GR1 is a compact, no-frills green laser aiming module made for people who just want a solid visible + IR setup without all the extra bulk. It gives you a bright 520nm green laser for fast daytime aiming and an IR laser for night vision use, both co-aligned so they hit the same point for easier zeroing. It’s built from lightweight 7075-T6 aluminum and sits lower and slimmer than older Holosun laser units, so it keeps your rail space clean. You also get simple controls with a top activation button, rear mode switch, and a remote pressure pad for flexible use. It’s basically a stripped-down, durable “green + IR only” unit for users who don’t need illumination but still want full NV capability.

-Nathan (Technical Advisor)

The Holosun IRIS-GR2 Green is a compact dual-laser aiming module built for modern rifle setups where you want both daylight and night-vision capability in one unit. It gives you a visible green laser for fast daytime aiming and an IR laser for use with night vision, with both lasers co-aligned so they share the same point of impact for easier zeroing. It’s built from lightweight 7075-T6 aluminum and designed to sit lower and slimmer than older Holosun laser units, so it doesn’t eat up rail space or feel bulky. You also get simple, glove-friendly controls with multiple activation modes and a rugged, sealed body built for recoil, water, and field use. In short, it’s a stripped-down, efficient “green + IR only” laser system for users who don’t need illumination but still want serious NV capability.

-Nathan (Technical Advisor)

The Holosun IRIS-GR3 Green is a compact, high-end multi-function laser and IR illuminator unit built for serious rifle setups. It combines a visible green laser for daytime aiming, an IR laser for night vision use, and a powerful VCSEL IR illuminator that helps you actually see and identify targets under nods instead of just aiming at shapes. It’s built from lightweight 7075-T6 aluminum and sits lower and slimmer than older Holosun laser units, so it doesn’t take over your rail. You also get co-aligned lasers for easier zeroing and a top-mounted adjuster that lets you quickly switch the IR beam from flood to spot depending on distance. In short, it’s a compact but very capable all-in-one aiming and night vision support system for rifle users who want full functionality without extra bulk.

-Nathan (Technical Advisor)

The Holosun IRIS-GR4 is a serious all-in-one aiming and lighting unit for people who want everything in one compact box. It packs a visible green laser, IR laser, IR illuminator, and a 1,000-lumen white light into a single rugged unit, so you can switch between daylight aiming, night vision use, and standard flashlight duty without swapping gear. The VCSEL IR system keeps the beam clean and efficient, and the IR illuminator can be adjusted from flood to spot depending on what you’re doing. It’s built from lightweight 7075 aluminum and designed to stay compact on rifles while still giving you full multi-role capability. In short, it’s basically a “do-it-all” laser/light module for modern rifle setups when you want maximum capability in minimum space.

-Nathan (Technical Advisor)

The Holosun IRIS-RD2 is a compact dual-laser aiming module that keeps things simple but capable. It gives you a visible red laser for normal daylight aiming and an IR laser for night vision use, both co-aligned so they hit the same point and are easier to zero together. It’s built from lightweight 7075-T6 aluminum and designed to sit lower and slimmer than older Holosun laser units, so it doesn’t crowd your rail. You also get solid, glove-friendly controls with multiple activation modes plus a remote pressure switch for easier handling in different setups. Overall, it’s a stripped-down, reliable “red + IR only” unit for people who want night vision capability without the extra bulk of an illuminator.

-Nathan (Technical Advisor)

The Holosun IRIS-RD3 is a compact, all-in-one laser and night-vision support unit built for serious rifle setups. It gives you a visible red laser for daylight aiming, an IR laser for night vision use, and a powerful VCSEL IR illuminator so you can actually see and identify targets under nods—not just point at them. Everything is packed into a lightweight 7075-T6 aluminum housing that’s slimmer and lower profile than older Holosun laser units, so it doesn’t take over your rail space. You also get co-aligned lasers for easier zeroing and an adjustable IR beam that can go from flood to spot depending on distance. It’s basically a compact, no-nonsense “day + night capability” upgrade for rifles that need full multi-role function.

-Nathan (Technical Advisor)

The Holosun IRIS-RD4 is basically a full “do everything” laser and light unit packed into one compact body. It gives you a visible red laser, IR laser for night vision use, a powerful IR illuminator, and a 1,000-lumen white light all in one setup, so you’re covered whether it’s daytime shooting, low light, or NVG work. It’s built from lightweight 7075 aluminum and designed to sit tighter and lower on a rail than older units, so it doesn’t feel as bulky as you’d expect for something this capable. You also get co-aligned lasers for easier zeroing and consistent point of aim across modes, plus adjustable IR beam spread so you can go from flood to spot depending on distance. It’s very much a “one box replaces multiple devices” setup for serious rifle use.

-Nathan (Technical Advisor)

The Holosun LS117R is a compact, rugged visible red laser aiming device built for rifle setups where quick target indexing matters. It’s got a clean collimated beam, a solid 7075 aluminum body, and a quick-detach Picatinny mount so you can throw it on or take it off without messing up your zero. With simple controls, a remote pressure switch included, and reliable windage/elevation adjustments, it’s a straightforward “point and shoot” aiming tool that works well as a backup or primary aiming aid depending on your setup.

-Nathan (Technical Advisor)

The Holosun LS221R & IR is a compact dual laser aiming unit that gives you both a visible red laser and an IR laser in one setup, built for serious rifle use—especially if you’re running night vision. It uses a co-axial design so both lasers are aligned, and it comes with a quick-detach Picatinny mount so you can pop it on or off without hassle. The housing is tough 7075 aluminum, it’s fully weather-resistant, and it includes a remote pressure switch for easier activation under stress. It’s basically a compact, durable “do-it-all” laser block for daytime aiming and NV setups when you need precision and flexibility in one unit.

-Nathan (Technical Advisor)

The Holosun LS321G & IR is a compact, all-in-one laser aiming unit built for serious rifle setups, especially if you’re running night vision. It packs a visible green laser for daytime use, a co-axial IR laser for NV aiming, and an onboard IR illuminator so you’ve got your own light source when things get dark. Everything is aligned together for easy zeroing, and the quick-detach Picatinny mount makes it easy to install or remove without messing up your setup. Built from tough 7075 aluminum with waterproofing and a pressure switch included, it’s basically a full-featured laser + illuminator package in one rugged block

-Nathan (Technical Advisor)

The Holosun LS321G & IR is a compact, all-in-one laser aiming setup built for serious rifle use, especially if you’re running night vision. It gives you a visible green laser for daytime or low-light work, a co-axial IR laser for NV use, and an onboard IR illuminator so you’re not stuck needing separate gear. Everything is aligned together for easy zeroing, and the quick-detach Picatinny mount makes it easy to install or remove without messing up your setup. Built from tough 7075 aluminum and designed for field use, it’s basically a full laser + NV aiming package in one rugged, compact unit.

-Nathan (Technical Advisor)

The Holosun P.ID 1000 Lumen is a compact pistol-mounted white light built for serious low-light use without overcomplicating things. It puts out a full 1000 lumens with a focused beam (high candela), so you get both brightness and reach for proper target ID instead of just flooding an area. The body is machined from tough 7075 aluminum, so it’s made to handle recoil and rough use, and it runs on a rechargeable 18350 battery with magnetic USB charging so you’re not constantly swapping cells. Ambidextrous controls keep it easy to run either hand, and the Picatinny mount makes it straightforward to attach to most setups. It’s basically a simple, durable “turn it on and trust it” duty-style weapon light.

-Nathan (Technical Advisor)

The Holosun LS321G & IR is basically a full-on multi-tool for rifle aiming in one compact unit. You get a visible green laser for daytime use, a co-axial IR laser for night vision, and an onboard IR illuminator so you can actually see your target in the dark instead of just marking it. Everything is aligned together so zeroing is simple, and the quick-detach Picatinny mount makes it easy to throw on or pull off without messing up your setup. It’s built from tough 7075 aluminum with a pressure switch included, so it’s designed for real field use—not just sitting on a safe queen rifle. It’s a chunky but capable all-in-one aiming and NV setup that covers pretty much everything in one box.

-Nathan (Technical Advisor)

The Holosun P.ID-HC is a compact but seriously punchy pistol-mounted weapon light built for clean target identification in low-light situations. It throws an 800-lumen beam with high candela, meaning it’s not just bright but also focused enough to reach out and cut through darkness. The body is machined from tough 7075 aluminum, so it’s made to take recoil and daily abuse without drama. It runs on a rechargeable 18350 battery with magnetic USB charging, and the ambidextrous controls make it easy to run from either hand. Add in a solid Picatinny mount and simple interface, and it’s a no-nonsense duty-style light that just works when you need it.

-Nathan (Technical Advisor)

The Holosun RAID Long-Gun Light is built for one thing—throwing a ton of usable light exactly where you need it. You’re getting 1,000 lumens paired with a seriously high 80,000 candela beam, so it’s not just bright, it actually reaches out and punches through the dark at distance. It comes ready to go with both Picatinny and M-LOK mounts, plus a pressure switch and tail cap option, so you can run it however your setup feels best. The 18650 rechargeable battery with USB-C is a nice touch, and the whole thing is wrapped in a tough 7075 aluminum body that’s waterproof and built to handle recoil. It’s basically a “set it up once and trust it” rifle light that leans hard into performance without getting complicated.

-Nathan (Technical Advisor)

The Holosun RML Green Rail Mounted Laser is a compact, lightweight aiming laser made for pistols and small rail setups when you want quick target indexing without adding much bulk. It uses a bright visible green laser that can switch between low (1mW) and high (5mW) output, so you can dial it in for visibility or conserve battery depending on the situation. The polymer housing keeps it light but still tough enough for recoil and regular use, and it mounts directly to a standard Picatinny rail. With ambidextrous controls, easy zero adjustment, and a slim profile that works well alongside lights, it’s a straightforward, no-fuss laser for close-range aiming.

-Nathan (Technical Advisor)

The Holosun RML Red Rail Mounted Laser is a small, lightweight aiming laser built for pistols or compact rail setups. It keeps things simple with a visible red laser that can switch between low (1mW) and high (5mW) output, so you can balance visibility and battery life depending on use. The polymer housing helps keep weight down while still being tough enough for recoil and daily handling, and it mounts directly to a standard Picatinny rail. You also get ambidextrous controls, easy windage/elevation adjustment for zeroing, and a compact profile that pairs well with lights or other rail accessories. It’s basically a no-frills, budget-friendly laser for quick target indexing at close range.

-Nathan (Technical Advisor)

The Holosun RMLT Green is a compact, rail-mounted laser built for shooters who want something small, tough, and straightforward. It uses a bright visible green laser with adjustable output, and the whole unit is built around a Grade 5 titanium housing, so it’s light but seriously durable. It mounts directly to a Picatinny rail with a quick-detach system, has ambidextrous controls, and is easy to zero with tactile windage and elevation adjustments. It’s basically a minimalist, bombproof aiming laser for close-range use where speed and simplicity matter more than anything else.

-Nathan (Technical Advisor)

The Holosun RML is a compact rail-mounted laser that keeps things simple and lightweight. It uses a durable polymer housing to cut down weight while still staying tough enough for recoil and daily use. You get a clean visible red laser (with adjustable 1mW / 5mW output depending on the model), ambidextrous controls, and easy windage/elevation adjustment so zeroing is straightforward. It mounts directly to a Picatinny rail and is small enough to pair with a light or optic without taking up much space. It’s basically a no-frills, budget-friendly aiming laser for quick target indexing in close-range setups.

-Nathan (Technical Advisor)

The Holosun RMLT-IR is a tiny, no-nonsense IR laser built for pistols or compact setups where you want night vision capability without adding bulk. It’s got a tough Grade 5 titanium body, so it’s way stronger than it looks, and it holds zero well even under recoil. Controls are ambidextrous and simple to use, and it mounts straight onto standard rails with included adapters. Since it’s IR-only, it’s designed purely for use with night vision—no visible laser, no extras—just a clean, reliable aiming point when things go dark. It’s basically a lightweight, durable “does one job properly” NV laser that won’t clutter your setup.

-Nathan (Technical Advisor)