Airsoft Optics & Accessories

The Holosun HS510C Spacer is a simple add-on that bumps your HS510C red dot up to a lower 1/3 co-witness height. Basically, it lifts the optic slightly so your iron sights sit in the lower part of the window instead of right in the middle, giving you a cleaner sight picture while still keeping backups visible. It installs between the optic and the mount, adds almost no weight, and is made from solid aluminum so it still holds up to recoil and rough use. It’s a cheap, easy upgrade that just helps dial in your setup without changing anything major.

-Nathan (Technical Advisor)

The Holosun HS515CM is a tough, no-nonsense rifle red dot built for hard use. It’s got a crisp 2 MOA dot with a 65 MOA circle option, so you can run it fast for close targets or tighten things up when you need more precision. The big window gives you a clear sight picture, and the solar panel plus battery combo means it stays powered without you constantly worrying about it. Add in shake-awake tech and a solid quick-detach mount, and you’ve got a rugged optic that’s made for rifles that actually get used, not just sit in a case.

-Nathan (Technical Advisor)

The Holosun LS117R is a compact, rugged visible red laser aiming device built for rifle setups where quick target indexing matters. It’s got a clean collimated beam, a solid 7075 aluminum body, and a quick-detach Picatinny mount so you can throw it on or take it off without messing up your zero. With simple controls, a remote pressure switch included, and reliable windage/elevation adjustments, it’s a straightforward “point and shoot” aiming tool that works well as a backup or primary aiming aid depending on your setup.

-Nathan (Technical Advisor)

The Holosun LS221R & IR is a compact dual laser aiming unit that gives you both a visible red laser and an IR laser in one setup, built for serious rifle use—especially if you’re running night vision. It uses a co-axial design so both lasers are aligned, and it comes with a quick-detach Picatinny mount so you can pop it on or off without hassle. The housing is tough 7075 aluminum, it’s fully weather-resistant, and it includes a remote pressure switch for easier activation under stress. It’s basically a compact, durable “do-it-all” laser block for daytime aiming and NV setups when you need precision and flexibility in one unit.

-Nathan (Technical Advisor)

The Holosun LS321G & IR is a compact, all-in-one laser aiming unit built for serious rifle setups, especially if you’re running night vision. It packs a visible green laser for daytime use, a co-axial IR laser for NV aiming, and an onboard IR illuminator so you’ve got your own light source when things get dark. Everything is aligned together for easy zeroing, and the quick-detach Picatinny mount makes it easy to install or remove without messing up your setup. Built from tough 7075 aluminum with waterproofing and a pressure switch included, it’s basically a full-featured laser + illuminator package in one rugged block

-Nathan (Technical Advisor)

The Holosun LS321G & IR is a compact, all-in-one laser aiming setup built for serious rifle use, especially if you’re running night vision. It gives you a visible green laser for daytime or low-light work, a co-axial IR laser for NV use, and an onboard IR illuminator so you’re not stuck needing separate gear. Everything is aligned together for easy zeroing, and the quick-detach Picatinny mount makes it easy to install or remove without messing up your setup. Built from tough 7075 aluminum and designed for field use, it’s basically a full laser + NV aiming package in one rugged, compact unit.

-Nathan (Technical Advisor)

The Holosun P.ID 1000 Lumen is a compact pistol-mounted white light built for serious low-light use without overcomplicating things. It puts out a full 1000 lumens with a focused beam (high candela), so you get both brightness and reach for proper target ID instead of just flooding an area. The body is machined from tough 7075 aluminum, so it’s made to handle recoil and rough use, and it runs on a rechargeable 18350 battery with magnetic USB charging so you’re not constantly swapping cells. Ambidextrous controls keep it easy to run either hand, and the Picatinny mount makes it straightforward to attach to most setups. It’s basically a simple, durable “turn it on and trust it” duty-style weapon light.

-Nathan (Technical Advisor)

The Holosun LS321G & IR is basically a full-on multi-tool for rifle aiming in one compact unit. You get a visible green laser for daytime use, a co-axial IR laser for night vision, and an onboard IR illuminator so you can actually see your target in the dark instead of just marking it. Everything is aligned together so zeroing is simple, and the quick-detach Picatinny mount makes it easy to throw on or pull off without messing up your setup. It’s built from tough 7075 aluminum with a pressure switch included, so it’s designed for real field use—not just sitting on a safe queen rifle. It’s a chunky but capable all-in-one aiming and NV setup that covers pretty much everything in one box.

-Nathan (Technical Advisor)

The Holosun P.ID-HC is a compact but seriously punchy pistol-mounted weapon light built for clean target identification in low-light situations. It throws an 800-lumen beam with high candela, meaning it’s not just bright but also focused enough to reach out and cut through darkness. The body is machined from tough 7075 aluminum, so it’s made to take recoil and daily abuse without drama. It runs on a rechargeable 18350 battery with magnetic USB charging, and the ambidextrous controls make it easy to run from either hand. Add in a solid Picatinny mount and simple interface, and it’s a no-nonsense duty-style light that just works when you need it.

-Nathan (Technical Advisor)

The Holosun RML Green Rail Mounted Laser is a compact, lightweight aiming laser made for pistols and small rail setups when you want quick target indexing without adding much bulk. It uses a bright visible green laser that can switch between low (1mW) and high (5mW) output, so you can dial it in for visibility or conserve battery depending on the situation. The polymer housing keeps it light but still tough enough for recoil and regular use, and it mounts directly to a standard Picatinny rail. With ambidextrous controls, easy zero adjustment, and a slim profile that works well alongside lights, it’s a straightforward, no-fuss laser for close-range aiming.

-Nathan (Technical Advisor)

The Holosun RML Red Rail Mounted Laser is a small, lightweight aiming laser built for pistols or compact rail setups. It keeps things simple with a visible red laser that can switch between low (1mW) and high (5mW) output, so you can balance visibility and battery life depending on use. The polymer housing helps keep weight down while still being tough enough for recoil and daily handling, and it mounts directly to a standard Picatinny rail. You also get ambidextrous controls, easy windage/elevation adjustment for zeroing, and a compact profile that pairs well with lights or other rail accessories. It’s basically a no-frills, budget-friendly laser for quick target indexing at close range.

-Nathan (Technical Advisor)

The Holosun RMLT Green is a compact, rail-mounted laser built for shooters who want something small, tough, and straightforward. It uses a bright visible green laser with adjustable output, and the whole unit is built around a Grade 5 titanium housing, so it’s light but seriously durable. It mounts directly to a Picatinny rail with a quick-detach system, has ambidextrous controls, and is easy to zero with tactile windage and elevation adjustments. It’s basically a minimalist, bombproof aiming laser for close-range use where speed and simplicity matter more than anything else.

-Nathan (Technical Advisor)

The Holosun RML is a compact rail-mounted laser that keeps things simple and lightweight. It uses a durable polymer housing to cut down weight while still staying tough enough for recoil and daily use. You get a clean visible red laser (with adjustable 1mW / 5mW output depending on the model), ambidextrous controls, and easy windage/elevation adjustment so zeroing is straightforward. It mounts directly to a Picatinny rail and is small enough to pair with a light or optic without taking up much space. It’s basically a no-frills, budget-friendly aiming laser for quick target indexing in close-range setups.

-Nathan (Technical Advisor)

The Holosun SCRS 2 MOA Solar Charging Green Dot is a compact, lightweight rifle optic that keeps things simple but really effective. You get a crisp 2 MOA green dot for fast, precise aiming, plus solar charging that helps keep it running as long as it sees some daylight. It’s built tough from 7075 aluminum and designed for modern rifles, with shake-awake tech and automatic brightness features so it basically looks after itself. It’s the kind of optic you can mount, zero, and just trust without constantly messing with it.

-Nathan (Technical Advisor)

The Holosun SCRS 2 MOA Solar Charging Red Dot is a compact, lightweight rifle optic that keeps things simple but really capable. You get a crisp 2 MOA red dot for fast, accurate shooting, plus solar charging that helps extend battery life whenever there’s light around. It’s built from tough 7075 aluminum and designed for modern rifles, with shake-awake tech and automatic brightness so it pretty much runs itself once it’s set up. It’s small, durable, and low-maintenance—just mount it, zero it, and go.

-Nathan (Technical Advisor)

The Holosun SCRS 2 MOA / 65 MOA Solar Charging Green/Red Dot is a compact, no-fuss rifle optic built for reliability. It’s got a crisp 2 MOA dot with an optional 65 MOA circle reticle, so you can run it fast for close work or switch to more precision when you need it. The solar charging system helps keep it powered up with daylight, and the internal battery plus shake-awake tech means it’s basically always ready without you thinking about it. Built from tough 7075 aluminum and designed for real-world use, it’s a lightweight, durable sight that works well on modern rifles without overcomplicating anything.

-Nathan (Technical Advisor)

The Holosun SCRS 2 MOA / 65 MOA Solar Charging Red Dot is a compact, modern rifle optic built for reliability without the extra weight or hassle. It gives you a crisp 2 MOA red dot for precision, plus a 65 MOA circle option that makes fast target pickup way easier when things get busy. The solar charging system helps keep it powered in good light, backed up by an internal battery so you’re not stressing about it dying on you. Add in shake-awake tech and a tough 7075 aluminum build, and it’s a lightweight, durable sight that’s ready for range days, training, or real-world use.

-Nathan (Technical Advisor)

The PAO® 4 x 32 Tri-Lume™ Prismatic Mil-Dot Ultra-Compact ACOG Rifle Scope combines ultra-compact size, 4x32 performance and a glass-etched illuminated Mil-Dot reticle in one rugged package. Featuring Tri-Lume™ red, green and blue illumination, fully multi-coated lenses, ¼ MOA adjustments and a wide field of view, it delivers fast, clear target acquisition. Its integrated QD 20mm Weaver / Picatinny mount, side accessory rails, fibre optic open sights and shockproof, waterproof, fog-proof construction make it a highly versatile optic for air rifles, rimfire and centrefire use.

• Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof, and Rainproof
• Up to 25" of Eye Relief Allowing for Effective Use on Handguns
• Projectile Drop Compensation Reticle Assists Shooting at Difference Distances
• Screw Lockable Turrets with Most Consistent and Precise 1/4MOA per Click Windage/Elevation Adjustment
• Adjustable Eyepiece with Locking Ring for Additional Security
• Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity
• Parallax Pre-set at 35Yds
• Complete with Medium Height Picatinny/Weaver Rings and High Quality Flip-open Lens Caps
• True strength scope platform using smart spherical structure(SSS) to achieve simplified and strengthened inner/outer tube interaction for most precise and responsive W/E adjustment and toughest recoil resistance.
• Side wheel adjustable turret opposite to the windage adjustment turret, controls different levels of red or green illumination in reticle, or turns off to return to black reticle, accommodates diverse weather/light conditions.
• Windage/elevation target turrets with center hex screw to control zeroing and zero resetting functions.
• Ring mounts with appropriate saddle height are included with the product

The Vector Frenzy 1x17x24 Red Dot 3MOA IP6 (TEK) is an ultra-lightweight red dot sight weighing just 18.4g, offering fast and precise target acquisition with its crisp 3 MOA dot and clear 17x24mm window lens. Featuring motion sensor activation for extended battery life up to 50,000 hours, it also includes 8 brightness levels and 2 night vision modes for versatile performance. Its super low-profile design, rugged aluminium construction, IPX6 waterproof rating, and shockproof durability make it ideal for reliable use in demanding outdoor conditions.

• The Extra-Large Window Size 22x26mm 0.85x1.0in. You Can See More!
• Multi Reticle w/ 8 Levels & 2 NV Intensity, 50,000 Hours for Weakest Visible Reticle.
• Super Slim Profile Only 7mm 0.3in Height That Won't Block Your Pistol Sights.
• Clear Lens w/ Premier & Protective Multi Coatings Almost Same Image as Naked Eyes.
• 6061-T6 Aluminum Housing in Rug Construction, Extreme Light Weight 30g 1.0oz.
• Weaver Mount & MOJ Footprint Compatible with R.M.R, IPX6 Water Proof.
• Complete User Control with Motion Sensor (2 Minutes Auto Shut-off).
• Designed for Real Firearms, Take 9mm, 45ACP, 12GA and Lapua Magnum 338 Recoil.

The Vector Nautilus 1x30 3 MOA QD Picatinny Red Dot Sight combines durability and modern functionality in a compact optic. Built from 6061 aluminium alloy, it features a wide 30mm lens for an enhanced field of view and rapid target acquisition. Its QD Picatinny mount allows tool-free attachment and removal, while tool-less windage and elevation adjustment ensures easy zeroing. With 11 brightness settings plus an auto brightness mode, it adapts to any lighting condition. Powered by a convenient AAA battery, it delivers reliable, user-friendly performance.

• 30mm Monotube
• Edgeless Image
•  Fully Multi-Coated
• Wide F.O.V
• Etched Glass BDC Reticle
• 1/2 MOA
• Illuminated

This rifle scope has been discontinued and replaced with the Vector Optics Continental X6 1-6x24 LPVO Fiber IR 1/2MOA 30mm Rifle Scope.

• Recoil Tested to 750g
• Light transmission of 90%
• 6061 T6 Aircraft Aluminium
• Waterproof and Nitrogen Purged
• Spare 1/2 MOA Turret

The Vector Optics Frenzy F3 26x32 GMR Green Dot Sight is a green multi-reticle optic for IPSC and USPSA pistol competition. It offers Precision, Speed, Reference and Tactical reticle modes, a multi-coated window and parallax-free alignment. A side-loading battery tray enables battery changes without re-zeroing, while motion-sensor activation supports operation after 10 minutes. It mounts to Weaver rails and is compatible with RMR® Standard mounting arrangements and selected pistol platforms.

• The extra-large window size 20x28mm 0.8x1.1”
• 6061-T6 aluminum housing in rug construction - lightweight 56g 2.0oz
• 6MOA dot size with 8 Levels & 2 NV red dot intensity
• Weaver mount & compatible for TEK footprint (can do TRI footprint too)
• >40,000 hours for NV dot & >20,000 hours for weakest visible dot
• IPX6 waterproof up to 1-meter depth for 30 minutes
• Take 9mm, 45ACP, 12GA, and Lapua Magnum 338 Recoil
• Clear lens with premier and protective coatings
• On/off switches on the side, complete user control and 4 hours auto shut-down

The Vector Optics Frenzy 1x20x28 RD (TEK) is a compact pistol red dot sight designed for speed and precision. It features a large 20x28mm viewing window and a crisp 3 MOA red dot for fast target acquisition. Built from durable 6061-T6 aluminium, it is IP67 waterproof and shock-resistant for reliable use in tough conditions. With 8 brightness settings plus night vision modes, a multi-coated lens for clarity, and an auto shut-off system, it delivers efficient, all-round performance in a lightweight package.

• XL Window 22x26mm
• 3 MOA Dot
• Low Profile
• Recoil Tested to .338 Lapua
• 40000 hrs NV setting
• 20000 hrs low intensity dot
• Includes Weaver Picatinny Mount

The Vector Optics Frenzy 1x22x26 MOS Red Dot Sight delivers fast, precise target acquisition with its large 22x26mm viewing window and crisp 3 MOA red dot. Its motion sensor technology automatically powers the sight on and off for improved efficiency and instant readiness, while 8 brightness settings plus 2 night vision modes ensure clear visibility in any lighting. The super low-profile design allows unobstructed sight alignment, and its IPX6 waterproof rating provides reliable performance in harsh outdoor conditions.

The Vector Optics Frenzy F3 26x32 GMR Green Dot Sight is a green multi-reticle optic for IPSC and USPSA pistol competition. It offers Precision, Speed, Reference and Tactical reticle modes, a multi-coated window and parallax-free alignment. A side-loading battery tray enables battery changes without re-zeroing, while motion-sensor activation supports operation after 10 minutes. It mounts to Weaver rails and is compatible with RMR® Standard mounting arrangements and selected pistol platforms.

The Vector Optics Frenzy FA 16x24 is a direct-mount red dot sight for Walther® PDP 2.0 optics-ready slides, requiring no adapter plate. Its low-profile fit supports co-witnessing with iron sights, while the 3MOA red dot and multi-coated 16 x 24mm lens provide a clear aiming reference. It has 11 illumination settings, including two NV-compatible options, motion activation, side-load CR1632 battery access, IPX7 waterproofing and 1500G shock resistance.

The Vector Optics Frenzy FA is an enclosed red dot sight designed for EDC, pistol and tactical use. Its 17x20 mm aspheric lens supports a choice of 3 MOA dot, circle and crosshair reticles in red. Nine daylight and two night-vision illumination settings are paired with a motion sensor and side-loading CR1620 battery tray. It uses the MGT footprint and includes a Weaver mount, while the aluminium housing has IP67 waterproofing and 1500G shockproof protection.

The Vector Optics Frenzy FA 18x22 Enclosed MRT is a red dot sight for 9mm pistols with a VOD footprint compatible with the ACRO® pattern. It provides three selectable red reticles: a 2 MOA dot, 65 MOA circle, or circle-and-crosshair combination. The sight has daylight and night-vision-compatible illumination, motion-sensor activation, side-loading CR2032 battery access and a multi-coated slim-edge window. Its 7075-T6 aluminium housing is IP67 rated and shockproof to 1500 G.

The Vector Optics Frenzy FA 20x24 CZ P-10 / Shadow 2 OR Red Dot Sight SDM is a low-profile, direct-mount optic for CZ® P-10 OR and Shadow 2 OR pistols. It uses a 3 MOA red dot, a 20 x 24 mm multi-coated lens and 11 brightness settings, including two NV-compatible levels. Its side-loading CR1632 battery tray enables battery replacement without re-zeroing, while motion-sensor shut-off helps deliver up to 50,000 hours of battery life.

The Vector Optics Frenzy FLEX is an IPSC-focused red dot sight with a 6 MOA red reticle and a large 24x29 mm multi-coated window. Its side-loading CR1632 battery tray permits battery changes without re-zeroing, while motion sensor activation helps manage runtime. The MGT footprint is compatible with RMSc, SMS and DPP patterns, and a Weaver mount is supplied. It has a 7075-T6 aluminium alloy housing, IPX7 waterproof rating and lifetime warranty.

The Vector Optics Frenzy FLEX is an IPSC-focused red dot sight with a 6 MOA red reticle and a large 24x29 mm multi-coated window. Its side-loading CR1632 battery tray permits battery changes without re-zeroing, while motion sensor activation helps manage runtime. The MGT footprint is compatible with RMSc, SMS and DPP patterns, and a Weaver mount is supplied. It has a 7075-T6 aluminium alloy housing, IPX7 waterpro

The Vector Optics Frenzy FLEX 24x29 GMR is a green multi-reticle sight for USPSA and IPSC pistol divisions. It offers dot, circle, crosshair and combined reticle modes through a large multi-coated window. Parallax-free alignment, side-loading CR1632 battery access and motion sensor activation support practical use. The sight has Weaver rail mounting, an MOJ footprint, IPX7 waterproof construction and 1500 G shock resistance. It is compatible with RMR Standard mounting arrangements.

• 3MOA Dot Size, 8 Levels and 2 Night Vision Red Dot, Coyote FDE, Battery Side Loading, Snag-Free Design.
• Complete User Control with Motion Sensor Feature (2 Minutes Auto Shut-Off), On/Off Switch.
• Enclosed Window 18x20mm 0.7x0.8in, Audible Clicks for Elevation and Windage Adjustment.
• ＞50,000 Hours Battery Runtime for Lowest Visible Reticle, IP67 Water Proof, VOD Footprint.
• Designed for Real Firearms, Take 9mm, .223, 5.56mm, 308, 12GA and Lapua Magnum 338 Recoil.
• Lifetime Warranty, Come With Low Weaver Mount.
• Works Great in All Weather Conditions, such as Rainy, Stormy, Snowy and Sandy Days.

• Fully Multi-Coated
• Edge-to-Edge Image No Inside Dark Ring Around Image
• 3x Zoom Factor
• 4" Eye Relief
• 25.4mm 1 Inch Monotube Made of 6061 T6
• 1/4MOA Capped Turrets
• MOA Reticle
• Wide Field of View 8.0 to 2.3°

Compact, solid, and lightweight, this red dot sight is built for tactical use, hunting, and sporting applications alike. Featuring a crisp 3 MOA dot with 11 brightness levels, unlimited eye relief, and ultra-low parallax for fast, precise target acquisition, it performs reliably in any environment. The rugged NBR+PVC rubber-armored housing meets mil-standard durability, is IPX6 waterproof, and operates from –55 °C to 70 °C. With precise 1 MOA audible adjustments, lower 1/3 co-witness compatibility, and a complete kit including a QD riser, lower mount, honeycomb sunshade, and lens caps, this optic delivers professional-grade performance straight out of the box.

-Nathan (Technical Advisor)

Compact, solid, and lightweight, this red dot sight is built for tactical use, hunting, and sporting applications alike. Featuring a crisp 3 MOA dot with 11 brightness levels, unlimited eye relief, and ultra-low parallax for fast, precise target acquisition, it performs reliably in any environment. The rugged NBR+PVC rubber-armored housing meets mil-standard durability, is IPX6 waterproof, and operates from –55 °C to 70 °C. With precise 1 MOA audible adjustments, lower 1/3 co-witness compatibility, and a complete kit including a QD riser, lower mount, honeycomb sunshade, and lens caps, this optic delivers professional-grade performance straight out of the box.

-Nathan (Technical Advisor)

• 3MOA Dot Size Red Dot Sight,
• With QD Riser Picatinny Mount and Low Weaver Mount,
• Night Vision Compatible
• Optical System Offers Clear Image,
• Designed for Fullbore/Rimfire/Airguns 
• 11 StageDot Intensity.